2:1 Art Epoxy Resin

2:1 Art Epoxy – For Quick and Professional Resin Projects

Specification

Mixing Ratio (Coating): R:H - 2:1

Mixing Ratio (Casting): R:H - 2:1

Pot Life At 25° C:
Coating: 10 – 25 Minutes
Casting: Approx. 10 Minutes

Touch Dry:
Coating: 4 – 5 Hours
Casting: 3 – 5 Hours

Fully Cured:
6 – 8 Hours

Measurement: By Weighing Scale

Viscosity At 25° C:
2000 – 3000

Hardness:
75 Shore D

Properties

Casting
Mix slowly and thoroughly in the container to minimize bubble formation. This resin is suitable for colored casting and works well for molds up to approximately 6 inches in size.

Best For
Ocean wave art, top coating, lamination coating, geode art and fast curing resin projects.

Transparency
High gloss finish with crystal clear, glass-like transparency.

Base Usage
Compatible with MDF, wood, resin surfaces, plastic, metal, glass, paper stickers and natural stones.

Wetting Ability
Spreads uniformly across the surface to create a smooth and even layer without gaps.

Consistency
Thick consistency that helps prevent dripping from the base. Second layer pouring can be done after 3 – 4 hours.

Features
Strong hard cure with reliable performance and conforms to ASTM standards.

Precautions

Application
Exercise caution in high temperature conditions as it may affect pot life and curing time.

Pot
Always use plastic mixing containers and fill only up to 50% of the pot capacity. Do not use paper cups for resin mixing.

Mixing
Mix thoroughly either manually or mechanically to eliminate haziness or streaks. Always test small quantities to confirm the correct ratio.

Safety
Wear personal protective equipment such as mask and gloves. Avoid eye and skin contact and wash with warm water if necessary. Work in a well-ventilated area and prevent inhalation of vapors, mist or gas. Keep the hardener bottle tightly closed when not in use.